Clik here to view.
TSB-5019: High Performance Structured Cabling Use Cases for Data Centers and...
TIA category 8 (or alternatively, ISO/IEC class I or class II) cabling is required to support 25GBASE-T and 40GBASE-T. Unlike all other BASE-T Ethernet applications developed for deployment over...
View ArticleClik here to view.
IEEE Std 802.3bw-2015: 100BASE-T1
IEEE Std 802.3bw™ ”IEEE Standard for Ethernet Amendment 1: Physical Layer Specifications and Management Parameters for 100 Mb/s Operation over a Single Balanced Twisted Pair Cable (100BASE-T1)” was...
View ArticleClik here to view.
The 2016 Ethernet Alliance Roadmap has Arrived
The Ethernet Alliance is a global consortium of system and component vendors, industry experts, and university and government professionals who are committed to the success and expansion of Ethernet...
View ArticleClik here to view.
TIA Approves Category 8 Addendum for Publication
The TIA TR-42.7 Copper Cabling Subcommittee approved ANSI/TIA‑568‑C.2‑1, “Specifications for 100Ω Category 8 Cabling” for publication in June, 2016. Category 8 cabling is a shielded balanced...
View ArticleClik here to view.
ISO/IEC 11801-1 Generic Cabling for Customer Premises – Part 1: General...
This International Standard will specify requirements for balanced twisted-pair copper (Classes A, B, C, D, E, EA, F, FA, I and II), coaxial (Class BCT-C), and optical fibre (OM1, OM2, OM3, OM4,...
View ArticleClik here to view.
ISO/IEC TR 11801-9901 Generic Cabling for Customer Premises – Part 9901:...
Early in the 40GBASE-T Ethernet application development process, it became understood that cabling specified to a bandwidth greater than 1,000 MHz would be required to support 40 Gb/s and higher...
View ArticleClik here to view.
IEEE P802.3cc 25 Gb/s Ethernet over Single-Mode Fiber Task Force
IEEE 802.3cc™ ”Standard for Ethernet Amendment: Physical Layer and Management Parameters for Serial 25 Gb/s Ethernet Operation Over Single-Mode Fiber” is currently under development by the IEEE...
View ArticleClik here to view.
IEEE P802.3cd 50 Gb/s, 100 Gb/s, and 200 Gb/s Ethernet Task Force
IEEE 802.3cd™ “Standard for Ethernet Amendment: Media Access Control Parameters, Physical Layers and Management Parameters for 200 Gb/s and 400 Gb/s Operation” is currently under development by the...
View ArticleClik here to view.
Cabling Considerations for 2.5G/5GBASE-T Operation
Q: When will the 2.5G/5GBASE-T Ethernet Standard be ratified? The IEEE 802.3bz™ “Standard for Ethernet Amendment: Media Access Control Parameters, Physical Layers and Management Parameters for...
View ArticleClik here to view.
Bundling Recommendations for PoE Applications
It is well understood that deploying 30 W and higher remote powering applications, such as Power over Ethernet (PoE) and Power over HDBaseT (POH), over balanced twisted-pair cabling produces a small...
View ArticleClik here to view.
Do I Need an LP-Rated Cable?
The 2017 edition of the NFPA 70® National Electrical Code® (NEC) contains a new Article 840, Part VI requirement addressing premise powering of communications equipment over communications cable. This...
View ArticleClik here to view.
ANSI/TIA-568.D-3: Optical Fiber Cabling Components
This Standard specifies performance and transmission requirements for premises optical fiber cable, connectors, connecting hardware, and patch cords. Transition methods used to maintain optical fiber...
View ArticleClik here to view.
ANSI/TIA-1152-A: Requirements for Field Test Instruments and Measurements for...
Field test instruments are used to test installed balanced twisted-pair cabling specified in the TIA family of structured cabling Standards. ANSI/TIA-1152-A “Requirements for Field Test Instruments and...
View ArticleClik here to view.
IEEE Std 802.3br™-2016: Interspersing Express Traffic
IEEE Std 802.3br™ “Standard for Ethernet Amendment 5: Specification and Management Parameters for Interspersing Express Traffic” was developed by the IEEE P802.3br Interspersing Express Traffic Task...
View ArticleClik here to view.
TSB-184-A: Guidelines for Supporting Power Delivery Over Balanced...
A wide range of safety extra low voltage (SELV) limited power source (LPS) applications may be supported using remote power deployed over balanced twisted-pair cabling. Examples of these types of...
View ArticleClik here to view.
IEEE Std 802.3-2015 Cor1-2017: Multi-lane Timestamping
IEEE Std 802.3™-2015 Cor1 “IEEE Standard for Ethernet Corrigendum 1: Multi-lane Timestamping” was developed by the IEEE P802.3-2015/Cor 1 (IEEE P802.3ce) Multi-lane Timestamping Task Force and approved...
View ArticleClik here to view.
IEEE Std 802.3bu-2016: Power over Data Lines (PoDL)
IEEE Std 802.3bu™ ”IEEE Standard for Ethernet Amendment 8: Physical Layer and Management Parameters for Power over Data Lines (PoDL) of Single Balanced Twisted-Pair Ethernet” was developed by the IEEE...
View ArticleClik here to view.
Clik here to view.
QSFP-DD: QSFP Double Density 8X Transceiver
“QSFP-DD Specification for QSFP Double Density 8X Pluggable Transceiver” is currently under development by the QSFP-DD MSA Group. QSFP-DD is a “double-density” module and cage/connector system similar...
View ArticleClik here to view.
OSFP: Octal Small Form Factor Pluggable Module
“Specification for OSFP Octal Small Form Factor Pluggable Module” is currently under development by the OSFP MSA Group. OSFP is a “double-density” module and connector system similar to the QSFP+...
View Article